What Is PP Cutting Board Material? Safety, Uses, and Care
A PP cutting board is a kitchen cutting surface made from polypropylene, a lightweight, water-resistant plastic used for chopping vegetables, slicing meat, and preparing other foods. Polypropylene boards are generally affordable, durable, and easy to clean. Many are dishwasher-safe, but repeated knife contact can create grooves and release small plastic particles, so proper care and timely replacement matter.
The letters “PP” on a cutting-board label may be unfamiliar, especially when the product looks almost identical to a regular plastic chopping board. The difference matters because plastic formulations vary in stiffness, heat tolerance, and cutting feel.
Choosing a suitable polypropylene board gives you a washable food-preparation surface without the oiling required for wooden boards. A well-designed model can also provide stable chopping, simple storage, and convenient cleaning after handling raw ingredients.
A 2023 study involving researchers at North Dakota State University estimated that chopping on polypropylene boards could expose a person to approximately 79.4 million microplastic particles annually, under the study’s assumptions. That estimate does not establish actual exposure for every user or prove that the particles cause health problems.
The simplest answer to what is PP cutting board material is polypropylene, a thermoplastic identified by recycling code 5. It is different from polyethylene, another common cutting-board plastic, and can have a firmer cutting feel.
What stood out to me during the research was the difference between a plastic’s general properties and the suitability of a finished product. Polypropylene can meet U.S. food-contact requirements, but the PP label alone does not verify a board’s additives, surface quality, or dishwasher rating.
The material properties, advantages, limitations, food safety considerations, microplastic concerns, cleaning methods, and buying checks below explain what to expect from a PP cutting board in a home kitchen.
What Is PP Cutting Board Material?

PP stands for polypropylene, a synthetic thermoplastic polymer used to manufacture many kitchen utensils, food containers, and cutting boards.
Polypropylene belongs to the polyolefin family of plastics. It is produced by joining propylene molecules into long polymer chains.
A thermoplastic is a material that softens when heated and becomes solid again when cooled. Manufacturers use this property to mold or shape polypropylene into different products.
How Is a PP Cutting Board Made?
Manufacturers produce polypropylene cutting boards using methods such as plastic molding or machining from solid plastic sheets.
The process generally involves forming the polymer into the desired shape, finishing the edges, and adding features such as handles or nonslip components.
Some boards are made from a single piece of solid polypropylene.
Others may include a polypropylene cutting surface combined with silicone edges, rubber feet, or additional plastic components.
The finished board may be rigid or somewhat flexible, depending on its thickness, polymer formulation, and construction.
Polypropylene is commonly used for cutting boards because it combines several useful properties:
- Low water absorption
- Relatively low weight
- Resistance to many household cleaning chemicals
- Good rigidity
- Resistance to ordinary kitchen moisture
- Suitability for food contact when properly formulated and manufactured
These properties make PP practical for both household food preparation and certain commercial kitchen applications.
What Does the Number 5 Mean on a PP Cutting Board?
The number 5 is the resin identification code for polypropylene.
It identifies the main plastic material used in a product.
The U.S. National Institutes of Health lists polypropylene as plastic number 5. Other familiar items made from this material include certain food containers, medicine bottles, and packaging components.
A recycling code may appear inside a triangular symbol on the underside of the board.
The code does not automatically prove that the finished board is food-safe or that it can be recycled locally.
Recycling programs differ by municipality, and some do not accept large plastic cutting boards.
Likewise, the number 5 identifies the polymer category, not the presence or absence of every additive.
Key Takeaway: PP cutting boards are made from polypropylene, a water-resistant thermoplastic identified by resin code 5. The material is common in food-contact products, but the finished board’s quality and suitability still need verification.
Main Features and Benefits of PP Cutting Boards
Polypropylene has several properties that make it useful for everyday cooking.
Its strongest advantages involve cleaning convenience, low water absorption, and manageable weight.
Lightweight and Easy to Handle
Polypropylene has a relatively low density compared with materials such as hardwood, glass, and stainless steel.
That makes many PP cutting boards easy to lift, move, wash, and store.
A lightweight board is convenient for transferring chopped vegetables into a pot or carrying ingredients from the counter to the stove.
Weight still varies with board thickness and dimensions.
A thick commercial-style PP board may feel more substantial than a thin plastic cutting mat.
Water-Resistant Cutting Surface
Polypropylene absorbs very little water.
Unlike wood, the plastic does not swell in the same way after ordinary washing.
Food juices also remain largely on the surface rather than soaking into the polymer.
This simplifies cleaning after preparing foods such as tomatoes, cucumbers, chicken, and fish.
Yet the material is not automatically sanitary.
Bacteria can remain on an unwashed surface, and knife grooves may trap food particles.
Water resistance reduces moisture absorption, not the need for washing.
Durability and Chemical Resistance
Polypropylene resists many common kitchen detergents and food ingredients.
A properly manufactured board can tolerate ordinary chopping, washing, and handling without breaking.
It does not need mineral oil, beeswax, or other wood conditioners.
Polypropylene also has greater heat resistance than some polyethylene formulations, although the safe operating temperature varies by product.
Repeated knife contact eventually leaves marks.
A board that resists water and household cleaners can still become unsuitable when its cutting surface is excessively damaged.
Affordable and Available in Different Designs
PP cutting boards are available in many colors, shapes, and sizes.
Some have flat cutting surfaces, while others include juice grooves, carrying handles, or nonslip edges.
Color-coded polypropylene boards are also used to separate food-preparation tasks.
For example, a kitchen may reserve one color for raw meat and another for vegetables.
This system provides a visual reminder, but the boards still need thorough cleaning after use.
Key Takeaway: PP boards are lightweight, water-resistant, and relatively simple to maintain. Their biggest practical advantage is easy daily cleaning without the conditioning required for wooden boards.
Are PP Cutting Boards Safe for Food?
Yes. A properly manufactured polypropylene cutting board can be safe for direct food preparation.
The key is confirming that the finished product uses materials suitable for its intended food-contact conditions.
Is Polypropylene Food-Grade Plastic?
Polypropylene can be manufactured for food-contact applications.
In the United States, the Food and Drug Administration regulates substances used in food-contact materials.
21 CFR 177.1520 addresses certain olefin polymers, including specified polypropylene materials.
The FDA also explains that the regulatory status of a finished food-contact material depends on the substances used to manufacture it.
This means polypropylene’s general acceptance for food contact does not automatically certify every cutting board labeled PP.
Colorants, additives, and other product components must also be suitable for the intended use.
When shopping, look for clear information about food-contact suitability and the manufacturer responsible for the product.
For commercial applications, verified NSF/ANSI 2 food-equipment certification or applicable NSF/ANSI 51 material certification may provide additional reassurance.
Do not assume that an unverified “FDA-approved” marketing claim means the agency individually tested or approved that finished cutting board.
Are PP Cutting Boards BPA-Free?
Polypropylene itself is not manufactured using bisphenol A, commonly called BPA, as a basic building block of the polymer.
BPA is associated with certain other plastic materials and resin systems.
For that reason, ordinary polypropylene is generally described as BPA-free.
Still, BPA-free does not mean that a cutting board has no additives or releases no material during use.
Colorants and other components may be included in a finished product.
A trustworthy manufacturer should be able to identify the main plastic and provide appropriate food-contact information.
Do PP Cutting Boards Prevent Bacteria?
No. Polypropylene does not automatically kill bacteria or prevent contamination.
Its relatively nonabsorbent surface is convenient to wash, but microorganisms can remain on dirty plastic.
The problem becomes more serious when repeated knife contact creates deep grooves.
Food residue can collect inside those cuts, making thorough cleaning difficult.
The U.S. Department of Agriculture recommends washing cutting boards after use and replacing them when they develop excessive wear or hard-to-clean grooves.
Proper cleaning is more dependable than relying on vague antibacterial claims.
Can PP Cutting Boards Be Used for Raw Meat?
Yes. A food-contact PP cutting board can be used to prepare raw chicken, beef, pork, and seafood.
The material does not absorb meat juices in the same way as an untreated porous surface.
That makes thorough washing relatively straightforward when the board is in good condition.
The USDA recommends keeping cutting boards used for raw meat, poultry, and seafood separate from those used for bread, produce, and other ready-to-eat foods.
I recommend using a dedicated plastic board for raw animal products and cleaning it immediately after preparation.
Do not transfer raw chicken juices to fresh vegetables by using the same unwashed cutting surface.
Key Takeaway: Food-contact polypropylene is suitable for cutting boards, but the PP label alone does not certify every finished product. Proper cleaning, surface condition, and separating raw foods remain central to food safety.
Do PP Cutting Boards Release Microplastics?
Yes. Polypropylene cutting boards can release small plastic particles when knives repeatedly cut or scrape their surfaces.
These particles are commonly described as microplastics when their dimensions fall below 5 millimeters.
This is a real limitation of plastic cutting surfaces, although the health implications of typical exposure are still being studied.
What Research Says About Polypropylene Particle Shedding
A 2023 study published in Environmental Science & Technology examined particle shedding from polyethylene and polypropylene cutting boards.
The research involved investigators affiliated with North Dakota State University and other institutions.
Researchers found that repeated chopping released plastic particles from both materials.
Under the study conditions, the number of microplastics released from polypropylene boards was approximately 14–71% greater than from polyethylene boards.
The researchers also estimated a possible annual exposure of 79.4 million polypropylene particles per person from cutting-board use.
These findings require careful interpretation.
The annual figure was calculated from study measurements and assumptions about cutting activity. It was not a direct measurement of every person’s actual annual intake.
The results also do not establish that all PP boards have identical particle-shedding rates.
Knife pressure, board formulation, surface condition, and chopping behavior can change the amount released.
Are These Microplastics Harmful?
The possible health effects of microplastics remain an active area of scientific investigation.
The U.S. FDA states that current scientific evidence does not demonstrate that the levels of microplastics and nanoplastics detected in foods pose a risk to human health.
That statement is not proof that all exposures are harmless.
Researchers are still examining particle size, polymer type, additives, exposure pathways, and possible long-term health effects.
My interpretation of the evidence is that polypropylene particle shedding should be acknowledged without presenting the estimated particle counts as proof of disease.
Consumers concerned about plastic exposure may prefer a suitable hardwood cutting board or a purpose-made alternative that does not use a polypropylene cutting surface.
How to Reduce Wear on a PP Board
The most practical approach is to limit unnecessary surface damage.
Use controlled cutting motions instead of repeatedly striking the board with excessive force.
Avoid dragging the sharpened edge sideways across the surface when gathering chopped ingredients.
A bench scraper or the back of a knife may be a better option for moving food, provided the technique does not gouge the board.
Inspect the surface regularly.
If deep grooves, loose plastic fragments, or rough raised edges develop, replacement is sensible.
These actions reduce unnecessary damage, but they do not guarantee zero microplastic release.
Key Takeaway: PP cutting boards can shed microplastics during chopping. Research has confirmed the process, but typical human health risks remain uncertain, and no ordinary plastic cutting board can be assumed particle-free.
PP vs HDPE Cutting Boards: What Is the Difference?
Polypropylene and high-density polyethylene are both common materials for plastic cutting boards.
They look similar, but their general material properties differ.
HDPE stands for high-density polyethylene and carries resin identification code 2.
PP carries code 5.
| Feature | PP Cutting Board | HDPE Cutting Board |
| Full material name | Polypropylene | High-density polyethylene |
| Resin code | 5 | 2 |
| Typical cutting feel | Firmer | More yielding |
| General rigidity | Often higher | Often lower |
| Heat tolerance | Generally higher | Generally lower |
| Water absorption | Very low | Very low |
| Knife marks | Develops with use | Develops with use |
| Dishwasher suitability | Many products are suitable | Some products are suitable |
| Maintenance | Washing and inspection | Washing and inspection |
| Best advantage | Rigidity and heat tolerance | Forgiving cutting feel |
These are general material tendencies. Actual results depend on formulation, board thickness, and manufacturing quality.
Which Plastic Is Better for Knives?
HDPE is often preferred for a softer cutting feel.
Its surface tends to yield more under a knife than a relatively rigid PP board.
That may reduce harsh contact during repeated chopping.
Polypropylene remains a suitable knife-contact material, but some formulations feel firmer and less forgiving.
Neither is as hard as glass or stone.
There is no reliable universal figure showing that every PP board dulls knives a fixed percentage faster than every HDPE board.
For frequent chopping with an expensive chef’s knife, I would give a slight preference to a high-quality HDPE board when cutting comfort is the main priority.
Which Plastic Handles Heat Better?
Polypropylene generally has a higher melting temperature than HDPE.
That can provide an advantage in applications involving elevated temperatures.
But melting temperature is not the same as the temperature at which a finished board begins to bend or distort.
A thin board can warp well before its polymer reaches its melting point.
Product dimensions, additives, and heat exposure all matter.
An NSF-certified material listing, for example, identifies different permitted temperature limits for certain polypropylene formulations.
For a home kitchen, the manufacturer’s dishwasher instructions are more useful than relying on the general melting point of polypropylene.
Key Takeaway: PP is commonly firmer and offers greater heat tolerance, while HDPE generally has a more forgiving cutting feel. Neither is automatically superior in every finished board.
Are PP Cutting Boards Knife-Friendly and Durable?
Polypropylene is suitable for ordinary kitchen knife use, but its long-term condition depends on cutting habits and product construction.
It offers more cushioning than hard metal, stone, or glass surfaces.
How PP Affects Knife Sharpness
When a knife reaches a polypropylene cutting surface, the plastic provides some resistance and slight deformation.
This is preferable to repeatedly striking a rigid stone or metal surface.
Still, PP can feel harder than HDPE.
That firmer contact may influence knife-edge wear during heavy chopping.
Blade hardness, sharpening angle, cutting pressure, and surface formulation also affect the outcome.
For regular preparation of vegetables, fruit, and meat, a sound PP cutting board is a reasonable choice.
Avoid twisting thin knife edges into the plastic or applying unnecessary force.
Scratch Resistance and Deep Knife Marks
Polypropylene is durable but not scratch-proof.
Repeated cutting creates visible marks.
At first, these may be shallow lines that do not interfere with cleaning.
Over time, the marks can become deeper, especially when chopping repeatedly in the same location.
A badly worn surface may develop rough patches or raised plastic around the grooves.
Those areas can trap food residue.
Do not confuse resistance to cracking with resistance to knife damage.
A PP board may remain structurally intact while its cutting surface becomes too deeply scored for satisfactory cleaning.
When Should a PP Cutting Board Be Replaced?
There is no universal replacement interval for polypropylene cutting boards.
The USDA recommends replacing cutting boards that become excessively worn or develop grooves that are difficult to clean.
Other replacement signs include:
- Cracks or separated components
- Permanent warping that causes rocking
- Deep cuts that retain food residue
- Loose plastic fragments
- Surface damage that prevents thorough cleaning
A stained board does not automatically need replacement if the surface is intact and can be cleaned properly.
The more important issue is the condition of the food-contact surface.
Key Takeaway: PP boards can handle ordinary knife work, but they accumulate marks over time. Replace the board when damage affects stability or thorough cleaning rather than relying on a fixed replacement date.
Can a PP Cutting Board Go in the Dishwasher?
Many polypropylene cutting boards are dishwasher-safe, but the material label alone does not guarantee dishwasher compatibility.
PP generally tolerates more heat than some other household plastics.
Yet high-temperature washing can still deform certain products.
Thin boards may bend, and attached nonslip feet or other components may have different heat limits than the polypropylene surface.
A board approved for ordinary dishwasher cleaning may not be suitable for every high-temperature sanitizing cycle.
Check the manufacturer’s instructions before using the dishwasher.
If approved, position the board securely so it does not bend against racks or contact heating components.
Do not use a PP cutting board as a trivet for hot cookware. Direct contact with a hot pan may deform the plastic even when the board is dishwasher-safe.
When dishwasher guidance is missing, hand-washing is the safer default.
How to Clean and Sanitize a PP Cutting Board
PP cutting boards require no special oiling or sealing.
Daily washing, occasional sanitizing when appropriate, and regular inspection are the main maintenance tasks.
Daily Cleaning Steps
Follow this routine after preparing food.
- Remove loose food debris. Scrape away crumbs, vegetable pieces, and remaining ingredients with an appropriate food-safe tool.
- Wash with hot, soapy water. Use dish soap and a sponge or soft brush to clean the cutting surface.
- Clean grooves and edges. Pay attention to handles, juice channels, and areas around nonslip components.
- Rinse thoroughly. Remove soap and loosened food particles with clean water.
- Dry the board. Let it air-dry or pat it dry with clean paper towels.
- Inspect the surface. Look for cracks, rough plastic, and deep cutting marks that may require replacement.
Clean the board immediately after handling raw meat, poultry, or seafood.
Do not leave food residue sitting inside knife grooves.
How to Sanitize a PP Cutting Board
Washing removes visible dirt and much of the contamination on a cutting surface.
Sanitizing provides an additional step when needed, especially after handling raw animal products.
The USDA recommends a sanitizing solution made with 1 tablespoon of unscented liquid chlorine bleach per gallon of water for cutting boards.
To use this method:
- Wash the board thoroughly with soap and water.
- Prepare the diluted bleach solution using a suitable unscented product.
- Apply the solution to the cleaned surface.
- Allow it to remain for several minutes, following relevant product directions.
- Rinse thoroughly with clean water.
- Allow the board to air-dry or pat it dry with clean paper towels.
Never mix bleach with ammonia, vinegar, or other cleaning chemicals.
For a commercial food-contact sanitizer, follow the product label’s dilution, contact-time, and rinsing directions.
A manufacturer-approved dishwasher cycle may also be used.
Removing Stains and Food Odors
Polypropylene may develop discoloration after contact with foods such as turmeric, tomato sauce, or strongly colored ingredients.
Garlic, onions, and fish may also leave odors.
Begin with ordinary dish soap and warm water.
For stubborn surface residue, use a cleaning product specifically suitable for food-contact plastic and follow its directions.
Avoid rough metal brushes, aggressive scraping, or abrasive pads that damage the cutting surface.
Some stains may remain without presenting a food safety problem.
Deep grooves containing food residue are a more serious concern than cosmetic discoloration.
Key Takeaway: Wash PP boards with soap and water after every use, sanitize when appropriate, and inspect the surface regularly. Avoid unnecessary abrasion and use the dishwasher only when the manufacturer permits it.
How to Choose a Good PP Cutting Board
Not every polypropylene cutting board offers the same stability, cutting feel, or cleaning convenience.
A few physical details make a meaningful difference.
Check Thickness and Stability
A thin PP cutting mat may be convenient for quick food preparation and storage.
A thicker rigid board generally provides greater resistance to flexing during chopping.
A stable board should sit flat against the counter without rocking.
Look for a nonslip base, secure rubber feet, or compatible nonslip mat.
Do not assume a smooth plastic underside will grip a wet countertop.
The board should remain stationary under normal cutting pressure.
Choose Enough Cutting Space
A useful cutting board needs room for both ingredients and knife movement.
For ordinary household preparation, boards around 12 × 18 inches provide a generous working area, although smaller models suit compact kitchens.
A large board may be preferable for cutting several vegetables or preparing bigger portions of meat.
Also consider the sink and dishwasher dimensions.
A board that fits comfortably inside your dishwasher is more convenient when machine washing is part of your cleaning routine.
Verify Food-Contact and Cleaning Information
Look for clear product specifications rather than relying only on claims such as “premium PP” or “non-toxic plastic.”
Useful information includes:
- Identified polypropylene material
- Intended food-contact use
- Manufacturer or responsible brand
- Dishwasher care instructions
- Stable construction and smooth edges
- Relevant food-equipment certification when required
For commercial use, a verified NSF product listing may provide useful confirmation that a specific board meets applicable requirements.
The recycling number 5 does not replace this information.
Consider Color-Coded Boards
Color-coded polypropylene cutting boards can be useful in kitchens preparing different food categories.
Using separate colors makes it simpler to keep raw meat and poultry away from ready-to-eat foods.
The color system is a reminder, not a substitute for cleaning.
A green board used for vegetables still needs washing after use.
A red board used for raw meat must be cleaned and sanitized as appropriate before storage.
Key Takeaway: Choose a PP cutting board with verified food-contact suitability, enough cutting space, stable construction, and clear cleaning instructions. Thickness and grip are more meaningful than decorative features.
Common Mistakes to Avoid With PP Cutting Boards
Several simple mistakes can shorten a board’s usable life or create cleaning problems.
Assuming every PP product is food-safe: Polypropylene can be used in food-contact products, but the finished board’s formulation and manufacturing conditions matter.
Treating the surface as scratch-proof: Repeated knife contact eventually creates cutting marks, even on rigid plastic.
Using a damaged board indefinitely: Deep grooves may retain food particles and make washing difficult.
Placing hot cookware on the board: Polypropylene has heat resistance, but direct contact with a hot pan may cause deformation.
Ignoring dishwasher instructions: A plastic code does not confirm that a board tolerates every washing cycle.
Using one unwashed board for all ingredients: Raw meat juices can transfer harmful microorganisms to ready-to-eat food.
Assuming BPA-free means particle-free: Polypropylene does not require BPA as a polymer ingredient, but knife contact can still release polypropylene fragments.
A well-maintained board is useful only while its surface remains suitable for cutting and cleaning.
Conclusion
A PP cutting board is a food-preparation surface made from polypropylene, a lightweight and water-resistant plastic identified by recycling code 5. It is commonly used for chopping vegetables, preparing meat, and other everyday kitchen tasks because it requires little maintenance and is generally easy to wash.
Its main advantages are convenient cleaning, low moisture absorption, and reasonable durability. Its limitations include permanent knife marks, possible warping under excessive heat, and microplastic particle shedding during cutting. Food-contact suitability and dishwasher approval should be verified for the specific product.
I recommend a well-made polypropylene board for cooks who prefer a low-maintenance plastic cutting surface with a relatively firm feel. Choose a stable model with clear manufacturer information, separate raw animal products from ready-to-eat foods, and replace the board when deep grooves or damage interfere with cleaning.
FAQs About PP Cutting Boards
What does PP mean on a cutting board?
PP means polypropylene, a type of thermoplastic used to manufacture cutting boards, food containers, and other kitchen products.
The material is lightweight, resists water absorption, and is suitable for food-contact applications when properly manufactured.
Polypropylene carries recycling code 5.
The marking identifies the plastic family, not a special cutting technique or surface coating. It also does not automatically establish that the finished board is dishwasher-safe or certified for food contact.
Is a PP cutting board safe to use every day?
Yes. A properly manufactured food-contact polypropylene board is suitable for everyday kitchen preparation.
It can be used for slicing vegetables, fruit, bread, and raw ingredients.
Wash the board after each use and use a separate surface for raw meat, poultry, and seafood to reduce cross-contamination.
Inspect the board for deep knife marks, cracks, and warping.
A board that becomes difficult to clean thoroughly should be replaced.
Is PP or PE better for cutting boards?
Both polypropylene and polyethylene are suitable plastic cutting-board materials.
PP generally has greater rigidity and higher heat tolerance.
HDPE, a common type of polyethylene, usually provides a softer and more forgiving cutting feel.
For frequent chopping, HDPE may be preferable when knife comfort is the priority.
PP is worth considering when a firmer surface and dishwasher-friendly product design are more important.
The actual performance depends on board thickness and plastic formulation.
Are PP cutting boards toxic?
Polypropylene itself is widely used in food-contact products and can meet U.S. food-contact requirements.
That does not mean every object manufactured from PP is automatically appropriate for cutting food.
The finished board’s additives, intended use, and manufacturing quality still matter.
PP boards may also release microplastic particles during chopping.
The FDA states that current evidence does not demonstrate a health risk from the levels of microplastics and nanoplastics detected in foods, while acknowledging that additional research is needed.
Do PP cutting boards dull knives?
Polypropylene provides a relatively firm plastic cutting surface and can contribute to normal knife-edge wear during repeated chopping.
It is generally more forgiving than glass, marble, or stainless steel.
Some HDPE boards may feel softer and more comfortable under the knife.
Blade geometry, knife steel, cutting force, and board formulation affect edge wear.
There is no dependable universal sharpening interval based solely on the PP material label.
Can PP cutting boards go in the dishwasher?
Many PP cutting boards are dishwasher-safe.
Polypropylene generally has good heat resistance, but thin boards or products with attached components may warp during high-temperature washing.
Follow the manufacturer’s instructions for the complete board.
A product marked with recycling code 5 is not automatically approved for dishwashers.
If dishwasher guidance is unavailable, wash the board by hand with hot, soapy water and dry it thoroughly.
How long does a PP cutting board last?
There is no fixed lifespan that applies to every polypropylene cutting board.
Durability depends on thickness, formulation, cutting frequency, knife pressure, and cleaning conditions.
Some boards remain usable for years, while heavily used surfaces may need earlier replacement.
Check for deep grooves, cracks, raised plastic fragments, and permanent warping.
The USDA recommends discarding cutting boards that become excessively worn or develop grooves that are difficult to clean.
Is polypropylene cutting board material recyclable?
Polypropylene is identified by resin code 5 and can be recycled through suitable recycling systems.
Actual acceptance varies by location.
Some U.S. municipal recycling programs accept certain number 5 containers but do not accept large rigid kitchen products such as cutting boards.
Check the local recycling program’s accepted materials before placing the board in a recycling bin.
The number 5 marking identifies the resin type; it does not guarantee that a particular board will be recycled.
