Sheesham vs Acacia Cutting Board: Which Wood Is Better?
Acacia cutting boards are generally the more practical choice for most American kitchens because they are widely available, durable, and suitable for everyday chopping. Sheesham cutting boards are also strong and attractive, with rich brown grain patterns. Neither wood is automatically better for knives or moisture resistance, since species, construction, and finishing quality affect performance.
The differences become more noticeable after repeated food preparation and washing. A board made from poorly dried wood may warp, while a hard, rough cutting surface can increase knife-edge wear. Choosing a board for its appearance alone can lead to unnecessary maintenance and disappointing results.
A well-constructed wooden board provides a stable cutting surface, protects the countertop, and can remain useful for years with proper care. The goal is to find the right balance between wood hardness, surface quality, durability, and cleaning requirements.
The U.S. Department of Agriculture’s August 2024 cutting-board guidance confirms that wooden boards can be used for raw meat and poultry when properly cleaned. It also recommends separating boards used for fresh produce from those used for raw animal foods. That food-safety advice applies to both hardwoods.
Wood hardness data reveals another useful distinction. The Wood Database lists sheesham at approximately 1,660 pounds-force on the Janka hardness scale, compared with 1,430 pounds-force for Acacia mangium. Other acacia species can be harder, so the common claim that all acacia wood is harder than sheesham is inaccurate.
What stood out to me during the research was how frequently acacia is described as one uniform material. For a sheesham vs acacia cutting board comparison, identifying the exact acacia species often matters more than broad claims about natural strength or water resistance.
Both woods can work well in a home kitchen, but there are meaningful differences in appearance, availability, grain, knife contact, and sourcing. Comparing those details alongside food safety, maintenance, and everyday uses will make it easier to choose a board that suits your cooking routine.
Sheesham vs Acacia Cutting Board: Quick Comparison

Sheesham and acacia are both hardwoods used in kitchen accessories, furniture, and decorative wood products. Their properties are not identical, and acacia characteristics vary substantially between species.
| Feature | Sheesham Cutting Board | Acacia Cutting Board |
| Wood type | Hardwood | Hardwood |
| Botanical identity | Dalbergia sissoo | Multiple Acacia species |
| Common names | Sheesham, sissoo, North Indian rosewood | Acacia, sometimes identified by individual species |
| Typical appearance | Golden brown to dark reddish brown | Honey, golden, reddish, or darker brown |
| Grain pattern | Often straight or interlocked with dark streaks | Varies from fairly even to strongly contrasting |
| Janka hardness | About 1,660 lbf | Varies; Acacia mangium is about 1,430 lbf |
| Knife friendliness | Firm surface; construction matters | Firm surface; varies by species |
| Moisture resistance | Durable heartwood, but not waterproof | Varies by species and finish |
| Cleaning | Usually hand-wash | Usually hand-wash |
| Maintenance | Dry promptly and condition as needed | Dry promptly and condition as needed |
| Weight | Generally dense and substantial | Varies considerably by species |
| U.S. availability | Less commonly stocked | Widely available |
| Best appeal | Rich grain and distinctive appearance | Everyday availability and varied designs |
The table highlights an important point: the wood species alone does not determine the quality of a finished cutting board.
A well-made acacia board can outperform a poorly constructed sheesham board, and the reverse can also be true.
What Is the Difference Between Sheesham and Acacia Wood?
The most basic difference is botanical identity.
Sheesham refers to a specific tree species, while acacia is a broader group of trees with different physical characteristics.
What Is Sheesham Wood?
Sheesham is a dense tropical hardwood obtained from the tree Dalbergia sissoo.
It is also called sissoo or North Indian rosewood and is native to the Indian subcontinent.
Sheesham is widely associated with traditional furniture, woodworking, carving, and household wooden products.
The heartwood ranges from golden brown to deeper reddish or chocolate brown, often with darker streaks. This gives the finished surface a distinctive appearance.
According to The Wood Database, dried sheesham has an average density of approximately 770 kilograms per cubic meter.
Its relatively high density contributes to a substantial feel and resistance to ordinary dents.
Sheesham can have straight or interlocked grain, and its texture is generally medium to coarse.
That grain structure deserves attention when choosing a cutting board. A smooth, carefully finished surface is preferable to an unfinished decorative piece with exposed rough pores.
Also, sheesham is not identical to every wood sold as Indian rosewood. The name may also be associated with other Dalbergia species.
For an actual sheesham board, look for the botanical name Dalbergia sissoo.
What Is Acacia Wood?
Acacia is a term used for wood from several tree species in the Acacia group.
These trees grow in regions including Australia, Asia, and Africa, with some species cultivated in plantations outside their native areas.
Acacia wood is common in cutting boards, serving trays, bowls, utensils, and furniture.
Its appearance varies considerably.
Some acacia boards have light golden-brown surfaces, while others show deep brown streaks and pronounced color differences between individual pieces.
Common species include Acacia mangium and Acacia auriculiformis, although manufacturers do not always identify the species used.
This matters because acacia wood is not uniformly hard, dense, or resistant to moisture.
One acacia species may be lighter and softer than sheesham, while another may be harder.
A product labeled simply “acacia wood” provides less information about its physical properties than one that lists the botanical species.
Key Takeaway: Sheesham refers to Dalbergia sissoo, while acacia covers several wood species. A specific species identification makes hardness and durability comparisons more reliable.
Which Wood Is Harder: Sheesham or Acacia?
Sheesham is harder than some acacia species, but other acacia species can exceed it in hardness.
There is no single hardness rating that accurately represents every acacia cutting board.
Sheesham vs Acacia Janka Hardness
The Janka hardness test measures the force required to press a steel ball into wood to a specified depth.
Higher values indicate greater resistance to indentation.
For example:
| Wood Species | Approximate Janka Hardness |
| Sheesham (Dalbergia sissoo) | 1,660 lbf |
| Mangium (Acacia mangium) | 1,430 lbf |
| Hard maple (Acer saccharum) | 1,450 lbf |
These are published species values, not guaranteed measurements for every cutting board.
The comparison shows that sheesham is harder than Acacia mangium, a species associated with plantation-grown timber.
Other acacia species have different ratings.
This is why I would avoid accepting a manufacturer’s claim that acacia is always harder than sheesham without a specific wood identification.
Janka hardness also measures resistance to dents, not the complete performance of a cutting board.
Which Wood Resists Knife Marks Better?
A harder wood may resist some surface impressions better than a softer wood.
Still, cutting-board wear is influenced by more than hardness.
Knife sharpness, cutting pressure, grain direction, finish, and the quality of construction all affect how marks develop.
Both sheesham and acacia are relatively hard materials, so shallow knife scratches are normal during repeated chopping.
A hard surface may resist visible marks while creating more stress on the knife edge.
A softer or more forgiving surface may develop marks sooner but provide a more comfortable cutting experience.
The ideal board is not necessarily the hardest one available.
Which Is Gentler on Kitchen Knives?
Neither wood has a guaranteed advantage in knife friendliness.
Sheesham is dense and firm, while acacia varies in hardness and grain characteristics.
Some acacia species contain mineral deposits that can contribute to cutting-edge wear. Sheesham can also contain deposits that increase wear on woodworking cutters.
The exact effect on kitchen knives varies with the board and blade.
For someone using thin Japanese knives or finely sharpened chef’s knives, I would prioritize a smoothly finished board with suitable grain construction.
A well-made end-grain board may offer a more forgiving surface than a hard face-grain board.
Traditional hard maple, walnut, and suitable rubber boards are also worth considering when knife-edge retention is the primary concern.
Key Takeaway: Sheesham is harder than Acacia mangium, but acacia hardness varies by species. Neither wood is automatically the gentlest option for kitchen knives.
Sheesham vs Acacia Cutting Board for Moisture Resistance
Both woods can tolerate ordinary food-preparation moisture when properly finished and cared for.
Neither material should be considered waterproof.
How Sheesham Handles Water
Sheesham heartwood has good natural decay resistance, which contributes to its reputation as a durable hardwood.
That does not mean a sheesham cutting board is unaffected by washing or prolonged water exposure.
Like other woods, sheesham absorbs and releases moisture as surrounding conditions change.
Uneven moisture exposure can create internal stresses that may contribute to cracking, cupping, or warping.
Properly dried sheesham can remain dimensionally stable under ordinary indoor conditions.
Problems are more likely when a board is poorly seasoned, left in standing water, or dried unevenly.
After washing, remove excess moisture and allow both sides to dry.
How Acacia Handles Water
Acacia is often marketed as naturally water-resistant.
Some species have durable heartwood, but moisture resistance varies.
Wood density, grain structure, drying quality, and finishing also affect how a particular acacia board responds to repeated washing.
Acacia boards made from several glued strips introduce another consideration: adhesive joints.
Excessive soaking or dishwasher exposure may weaken poorly constructed joints and contribute to separation.
Even when the wood itself remains sound, a damaged glue line can make the board unsuitable for continued use.
For that reason, an acacia cutting board should usually be hand-washed and dried promptly.
Which Is Less Likely to Warp?
Neither material can be declared the universal winner.
Sheesham has relatively favorable published shrinkage characteristics, while acacia species differ considerably.
Board construction often matters more than the wood name.
A properly dried, well-constructed acacia board may remain flatter than an improperly seasoned sheesham board.
The opposite is equally possible.
Keep In Mind: Do not soak either board in a sink or leave it flat on a wet countertop. Moisture trapped against one side can contribute to uneven expansion and warping.
Key Takeaway: Both hardwoods require prompt drying and proper construction. Natural durability does not make sheesham or acacia immune to moisture damage.
Are Sheesham and Acacia Cutting Boards Food-Safe?
Both woods can be used for food preparation when the finished product is manufactured for food contact and maintained correctly.
The safety of the board involves more than the tree species.
Surface coatings, adhesives, cleanliness, and physical condition all deserve attention.
Food-Safe Finishes and Adhesives
A wooden product sold as a decorative tray or furniture accessory is not automatically suitable for chopping food.
Some decorative wood products have stains, varnishes, pigments, or other coatings that are not intended for repeated food contact and knife wear.
For both sheesham and acacia, look for a manufacturer that identifies the board as suitable for direct food preparation.
If the board is made from glued pieces, the adhesive should be appropriate for the product’s intended food-contact use.
A glossy finish is not proof of food safety.
I would avoid cutting directly on an unidentified decorative sheesham platter, even if its wood appears similar to a kitchen cutting board.
Bacteria and Cross-Contamination
Neither wood should be treated as naturally self-sanitizing.
Claims about antibacterial properties do not replace washing and proper food handling.
Both surfaces can retain food residue when poorly cleaned, especially around cracks or damaged joints.
The USDA advises using a separate cutting board for fresh produce and bread and another for raw meat, poultry, and seafood.
This reduces the chance of cross-contamination, which occurs when harmful microorganisms move from one food or surface to another.
The same food-safety habits apply to sheesham and acacia:
- Wash the board after preparing food.
- Use separate surfaces for raw animal foods and ready-to-eat ingredients when possible.
- Clean knives and countertops after contact with raw meat.
- Replace boards with deep, hard-to-clean damage.
Is Sheesham Wood Toxic or Unsafe?
Sheesham should not automatically be described as toxic simply because it belongs to the Dalbergia genus.
Still, some rosewoods are associated with skin sensitivity, and reported reactions to sheesham include skin irritation.
This information is especially relevant to woodworkers exposed to wood dust.
It does not establish that every finished sheesham cutting board creates a food-safety risk.
People with known wood sensitivities should take extra care when selecting products from unfamiliar or sensitizing wood species.
For ordinary food preparation, choose a properly manufactured board with clearly identified materials and a suitable finish.
Which Is Better for Raw Meat?
Either wood can be used for raw meat preparation when the board is suitable for food contact, undamaged, and thoroughly cleaned afterward.
Neither has a demonstrated universal sanitation advantage over the other.
For frequent raw chicken or seafood preparation, I prefer a separate dishwasher-safe plastic board because it is convenient to wash and sanitize.
A wooden board can then remain dedicated to vegetables, fruit, bread, and other everyday tasks.
Key Takeaway: Both woods can be appropriate for food preparation, but food-contact-safe construction and thorough cleaning matter more than claims about natural antibacterial properties.
Which Cutting Board Is Easier to Clean and Maintain?
Sheesham and acacia have similar cleaning requirements.
Both generally need hand-washing, proper drying, and periodic conditioning.
How to Clean Sheesham and Acacia Cutting Boards
Use a gentle cleaning routine after food preparation.
- Remove food scraps. Scrape away loose pieces using a suitable utensil without gouging the wood.
- Wash with hot, soapy water. Use mild dish soap and a soft sponge or brush to clean the surface.
- Clean grooves and edges. Pay attention to juice channels, handles, and glued joints.
- Rinse with clean water. Remove remaining soap and food particles.
- Dry thoroughly. Pat the surface dry with a clean towel, then position the board so air can reach both sides.
Avoid prolonged soaking.
Dishwasher cleaning is also generally unsuitable for laminated wooden cutting boards. Heat and extended moisture exposure can contribute to warping, cracks, and adhesive failure.
How Often Should You Oil the Boards?
Both sheesham and acacia can benefit from periodic conditioning with food-grade mineral oil or an approved cutting-board conditioner.
There is no universal oiling schedule for either species.
Frequency varies according to how often the board is washed, the surrounding humidity, and the manufacturer’s finish.
Signs that a board may need conditioning include a dry appearance, faded finish, or rough surface.
Apply a thin, even coat of food-grade mineral oil to a clean, fully dry board.
Allow the oil to absorb according to the product instructions, then wipe away excess oil before returning the board to use.
Mineral oil does not turn a wooden board into a waterproof surface.
Avoid using ordinary cooking oils that may become rancid during storage.
How to Remove Stains and Odors
Acacia and sheesham can both develop food stains.
Strongly colored ingredients, such as beets or turmeric, may leave temporary discoloration.
Prompt washing reduces the chance of stains remaining.
A mild dish-soap wash is the best starting point.
Avoid aggressively scraping the wood or applying harsh chemicals that could damage the finish.
If odors persist, wash the board thoroughly and allow it to dry completely.
Do not assume that lemon juice, vinegar, or salt alone reliably sanitizes a board after contact with raw meat.
When Should You Replace a Wooden Board?
The USDA recommends replacing boards that become excessively worn or develop grooves that cannot be cleaned properly.
For sheesham and acacia, inspect for deep cracks, splinters, separating glue joints, and areas that remain difficult to wash.
A minor cosmetic scratch does not necessarily require replacement.
A board with structural damage or trapped food residue should no longer be used for cutting food.
Key Takeaway: Sheesham and acacia require nearly identical care. Hand-wash, dry completely, condition when needed, and inspect for structural damage.
Which Wood Is More Durable and Offers Better Value?
A board’s lifespan depends heavily on workmanship.
Wood density matters, but it cannot compensate for poor drying, defective glue joints, or unsuitable surface finishes.
Solid Wood vs Laminated Construction
Cutting boards may be made from a single piece of wood or several joined pieces.
A single-piece board avoids glue joints but can still warp or crack as the wood expands and contracts.
A laminated board uses multiple pieces bonded together.
This construction can create a broad, stable cutting surface when the wood is dried and joined correctly.
Poorly made laminated boards may develop gaps or separated joints after repeated washing.
For either species, look for tight joints, a flat surface, and no visible cracks.
Edge Grain vs End Grain
Edge-grain cutting boards expose the long sides of wood fibers on the cutting surface.
They are common in everyday wooden boards and often cost less to manufacture.
End-grain cutting boards expose the ends of the wood fibers.
Their construction can provide a more forgiving surface under repeated knife contact, although the actual performance depends on the wood and craftsmanship.
End-grain boards usually require more manufacturing work and may be thicker and heavier.
The grain orientation can matter as much as the choice between sheesham and acacia.
Price and Availability in the United States
Acacia cutting boards are relatively easy to find through American kitchenware retailers.
They are available in many sizes, shapes, and designs, including reversible boards and models with juice grooves.
Genuine sheesham boards are less common in mainstream U.S. kitchenware selections.
Sheesham is strongly associated with South Asian woodworking and may appear through specialty retailers or sellers of imported kitchen accessories.
Prices vary according to dimensions, thickness, finish, construction, and sourcing.
Acacia is not always cheaper, and sheesham is not automatically a premium product.
Another consideration is sourcing.
Sheesham belongs to the Dalbergia genus, which is covered by international CITES trade rules. Certain finished products qualify for exemptions, so a finished sheesham board is not automatically prohibited from international trade.
For imported products, a reputable retailer should be able to identify the wood and provide reasonable sourcing information.
Key Takeaway: Acacia is generally easier to purchase in the United States, but a well-made sheesham board can also be durable. Construction quality is more useful than price or species reputation alone.
Sheesham vs Acacia Cutting Board for Different Kitchen Tasks
Both woods can handle ordinary food preparation, but certain differences matter more for specific uses.
Everyday Vegetable Chopping
Practical choice: Acacia
A well-made acacia board is a convenient option for chopping onions, carrots, potatoes, herbs, and other vegetables.
Its availability in different sizes makes it easier to find a board that fits your countertop.
A sheesham board can perform the same tasks when it has a smooth cutting surface and stable construction.
The larger practical advantage for acacia is product availability rather than a proven difference in chopping ability.
Slicing Bread and Preparing Sandwiches
Practical choice: Either wood
Both materials can support bread slicing and sandwich preparation.
The main considerations are a stable surface, enough working area, and easy cleanup.
A rectangular board without a deep juice groove often provides more usable space for bread.
Choose based on size, finish, and appearance rather than hardness alone.
Serving Cheese and Appetizers
Practical choice: Sheesham for its distinctive appearance
Sheesham’s warm brown tones and natural streaks can create an attractive serving surface.
It may suit cheese, crackers, bread, and prepared appetizers when manufactured for direct food contact.
Acacia is also an appealing serving-board material, often displaying strong contrasts between lighter and darker sections.
The visual preference is subjective.
I would choose sheesham for a rich, traditional-looking board and acacia for the wider variety of readily available designs.
Preparing Raw Meat
Practical choice: Either, with careful cleaning
Both woods can be used for raw meat preparation if the board is designed for cutting food and maintained properly.
Neither eliminates the risk of cross-contamination.
For someone regularly handling raw poultry, a separate nonporous plastic board may offer simpler dishwasher cleaning.
If using sheesham or acacia, wash the board immediately afterward and follow appropriate food-contact sanitizing instructions.
Heavy Chopping and Cleaver Use
Practical choice: A purpose-built chopping block
Hardwood density alone does not make a board suitable for heavy cleaver strikes.
A thin sheesham or acacia serving board may crack under repeated heavy impacts.
For demanding chopping, look for a thick, stable block specifically manufactured for that purpose.
Avoid cutting bones on a decorative wooden board unless the manufacturer explicitly approves that use.
Key Takeaway: Acacia is a convenient everyday option, while sheesham is appealing for distinctive serving pieces. Both can handle ordinary cutting when properly constructed.
What to Check Before Buying a Sheesham or Acacia Cutting Board
A few product details reveal more about cutting-board quality than decorative photographs or broad claims about hardwood.
Check the Wood Species and Finish
A sheesham listing should identify the material as Dalbergia sissoo.
For acacia, a species name is useful because hardness and density vary.
Look for a clear statement that the board is manufactured for food preparation.
Avoid cutting directly on products identified only as decorative trays, stained display pieces, or furniture accessories.
Unidentified coatings are a reason to seek more information before purchasing.
Check Thickness and Stability
The board should remain flat and stable during normal knife movements.
A thicker board often feels more substantial, but thickness alone does not guarantee stability.
Non-slip feet or a suitable mat can reduce movement on smooth countertops.
Check the actual dimensions and weight.
For many home kitchens, a board around 12 by 18 inches provides useful cutting space if the sink and counter can accommodate it.
A smaller board may work for fruit preparation, while larger boards offer more room for handling several ingredients.
Inspect Surface Quality and Grain
A cutting board should feel smooth, with no splinters or raised sections.
Look closely for gaps between glued pieces.
Check that the edges are neatly finished and that no cracks run through the surface.
Decorative wood grain can look attractive in photographs while hiding poor construction.
For everyday cutting, a flat, well-finished surface is more useful than an elaborate shape that reduces working room.
Consider Maintenance Before Purchase
Both woods generally require hand-washing and careful drying.
A board that is too large for your sink may be inconvenient to clean.
A heavy board may remain stable during cutting but be awkward to lift and store.
If you prefer dishwasher cleaning, a suitable plastic cutting board may be more practical than either hardwood.
Key Takeaway: Verify the wood, food-contact suitability, finish, construction, size, and cleaning instructions before choosing either board.
Common Mistakes When Comparing Sheesham and Acacia Cutting Boards
One common mistake is assuming that acacia is always harder than sheesham.
The published hardness rating for Acacia mangium is lower than that of Dalbergia sissoo. Other acacia species can differ substantially.
Another mistake is treating natural moisture resistance as waterproofing.
Both woods can warp or crack when exposed to prolonged moisture, especially when poorly dried or constructed.
Some buyers also choose a wooden board based on its polished appearance without checking the finish.
A decorative sheesham serving tray may not be intended for repeated knife use. Similarly, a glossy acacia platter is not automatically a food-preparation board.
Finally, choosing the hardest possible wood is not always best for kitchen knives.
A well-made board should balance resistance to wear with a surface that does not place unnecessary stress on the knife edge.
Conclusion
The sheesham vs acacia cutting board decision favors acacia for most U.S. home kitchens because it is readily available in practical designs and can provide a durable everyday cutting surface. Sheesham remains an appealing alternative for anyone who prefers its rich grain and substantial feel.
Neither wood has a universal advantage in knife friendliness, moisture resistance, or food safety. Acacia properties vary by species, while the condition, finish, and construction of both boards affect their usefulness.
My recommendation is to choose a well-made acacia board for general kitchen prep when the product offers clear material information and a suitable food-contact finish. Choose sheesham if you prefer its appearance and can find a properly manufactured cutting board from a reliable seller.
Regardless of the wood, wash the surface after use, dry it thoroughly, and replace it when cracks or deep grooves prevent proper cleaning.
FAQs About Sheesham and Acacia Cutting Boards
Is sheesham wood better than acacia for cutting boards?
Sheesham is not automatically better than acacia.
Sheesham is a dense, durable hardwood with distinctive brown grain patterns. Acacia includes several species with different hardness and moisture characteristics.
Acacia is generally easier to find in American kitchenware stores, making it a convenient everyday option. A high-quality sheesham board can be equally suitable for ordinary cutting when properly manufactured and maintained.
Is sheesham harder than acacia wood?
Sheesham is harder than some acacia species but softer than others.
The Wood Database reports a Janka hardness of approximately 1,660 pounds-force for Dalbergia sissoo and 1,430 pounds-force for Acacia mangium.
Other acacia species have different hardness ratings.
For an accurate comparison, identify the botanical species rather than relying on a general acacia label.
Is sheesham wood safe for cutting food?
Sheesham can be suitable for cutting food when the board is manufactured for food contact and finished with appropriate materials.
Avoid using decorative wooden products with unidentified stains or varnishes as cutting surfaces.
Some rosewoods, including sheesham, have been associated with skin irritation in sensitive people, especially during woodworking exposure.
A clean, undamaged board from a reputable manufacturer is preferable to an unidentified decorative item.
Which is more water-resistant, sheesham or acacia?
Neither wood has a guaranteed advantage in every application.
Sheesham heartwood has good natural durability, while the moisture properties of acacia vary between species.
The quality of drying, construction, and finishing influences how either cutting board handles water.
Both should be washed promptly, dried thoroughly, and kept out of dishwashers unless the manufacturer specifically permits that cleaning method.
Does an acacia cutting board dull knives faster than sheesham?
There is no reliable universal ranking for knife wear between acacia and sheesham.
Both can be relatively hard, and acacia varies substantially by species.
Knife-edge wear also depends on grain orientation, surface finish, blade steel, sharpening angle, and cutting technique.
For expensive or finely sharpened knives, a suitable end-grain board or softer hardwood may be a more forgiving alternative.
Is sheesham the same as Indian rosewood?
Sheesham, botanically known as Dalbergia sissoo, is commonly called North Indian rosewood or Indian rosewood.
The name Indian rosewood can also refer to Dalbergia latifolia, a separate species.
These woods have different physical characteristics.
Check the botanical name when purchasing a sheesham cutting board, especially from sellers using broad terms such as rosewood or exotic hardwood.
Are acacia cutting boards cheaper than sheesham boards?
Acacia cutting boards are often easier to find across budget and mid-priced kitchenware collections in the United States.
Sheesham boards are less commonly stocked and may be sold through specialty retailers.
Still, price varies with board size, thickness, grain construction, finish, and brand.
A large, well-made acacia board may cost more than a smaller sheesham board, so the wood name alone is not a reliable price indicator.
Do sheesham and acacia cutting boards need oiling?
Both materials may need periodic conditioning to reduce excessive surface drying.
Use food-grade mineral oil or a board conditioner recommended by the manufacturer.
Apply it to a clean, completely dry surface and wipe away any excess.
The frequency depends on washing habits, humidity, and the existing finish. A board that begins looking dry or rough may need conditioning sooner than one that is rarely used.
